点击图片查看原图
通过认证 
产品特点
1.操作简单Easy to operate
基于WINDOWS系统编程软件，界面简洁，操作简单，功能完善；圆形化制作加工数据，所见即所得，减少切割程序编辑时间；
WYSIWYG display since drawing processing data application,to reduce cutting edited time.
2.精湛的视觉自动定位Super Visual positioning
专用光源的，配合高像素数字彩色CCD放大镜头，辅助程序示教编辑功能，成像高清稳定.
Special light source,equipped with high pixel CCD enlarging lens,teaching,creating and editing functions,and the image is stability and clear
自动找MARK点视觉功能，结构精密，分析精度更高
By automatically visual MARK point finding function precise structure,to have higher for the PCB milling
3.切割系统Cutter system
采用高速主轴切割PCB板。切割应力小、精度高、低噪音；适应任何切割形状和电路板，如：整圆、直线、L型、U型、方型、弧形。
The milling cutter is driven by a high speed spindle with the advantage of areduced cutting force,high accuracy low noise and is suitable for all cutting formats such as cricles ,straight line,Lor U type,squares and arc shapes.
4.双工作台可编不同产品进行切割，帮助企业有效降低设备闲置时间，最大限度地提高生产效率。
Two slide workbable can support different cutting shape,reducing changeover idle capacity and maximizing productivity.
5.双工作台进出皆采用松下伺服马达+丝杆+道轨，精度更高、速度更快、分板应力小、稳定性耐用性更佳。
Double entry and exit of the working table is made of Panasonic servo motor +screw+guide rail, with higher accuracy, faster speed, less stress and better durability.
6.安全光幕：符合国际安全标准，为员工提供一个安全工作的环境。
Safety:comply with international safety standards ,to provide a safe working environment for employees.
7.最大有效切割行程X350*Y400（上吸尘），未来产品扩容性大
The moste effective cutting line and X350*Y400(on the dust), the future expansion of large products.
8.可单独上或下集尘，也可同时上下集尘，更加灵活，标配上吸尘，吸尘口随铣刀同时运行，吸取局部小范围，吸尘效果比下吸尘提升80%
Can be alone or the dust collection ,but also at the same time the dust collection ,more flexible, standard on the vacuum cleaner, dust suction mouth with the milling cutter at the same time run, absorb a small area, the dust absorption rate than the vacuum cleaner 80%.
9.标配MES或ERP连接端口，实时连接中央数据库，实现设备信息化管理无缝对接，开放以太纳接口，并支持TCP/IP网络通信协议，及必要的相关软件、程序。
Standard MES or ERP connection port, real-time connection to the central database, realize the equipment and seamless docking, open Ethernet interface, and support the TCP/IP network communication protocol, and related software, the necessary procedures.
10.标配条码扫描，可实现分板后即时上传单板条码信息。
Standard bar code scanning, can be achieved after the board immediately upload single board barcode information.
11.飞行相机结构，当左右平台的产品高度不一致时，可实现自动对焦识别Mark点。
Flying camera structure, when products are highly inconsistent about platform, which can realize automatic focus recognition Mark points.
